Glow Fire Cobalt Instructions De Montage page 8

3.Assembly Instructions
First unpack the entire contents of the box and please check that it is complete.
Please insert the screws into the holes provided. Then place the side parts 2 and 3 on part 1
and screw the parts together using the cage connector. Then add part 4 and screw it to part 2
and 3.
To assemble parts 5, 6, 7 and 8, also insert the screws and basket connectors into the holes provided.
Then mount the front parts 5 and 6 on the underside, part 1, of the facade. Also connect the side parts
2 and 3 to the front parts 5 and 6.
8 Stand: 09/2021
Version: 1