KINZO BL-168DLR Manuel D'utilisation page 4

and '1H' and '2H' and '4H' indicators will all be lit. The air cooler will stop working after
seven and a half hours.

Press the button for a sixteen time. The indicators will go out and the air cooler will no
longer be using the timer function.
How to add water to the water tank
Pull out the water tank from the bottom of the air cooler's rear and drain off 1/3 of the

water tank while adding fresh water.

Watch the water level while adding water.
While water is being added, the water level for the tank must stay below 'Max'.


While the air cooler is cooling and humidifying, the water level for the tank must be
above 'Min'.

Ice packs or ice can be placed into the water tank for cooler air.

Warning:
The water level of the water tank should still be below 'MAX' even after ice packs or

ice have been placed in the tank.
How to use ice packs

Cold ice packs can slowly absorb the heat from water, making it cooler than the
surroundings. An air cooler containing frozen ice packs will produce cooler air.

Place the ice packs in a fridge. Once the ice packs are frozen, take them out.

Pull out the water tank and place the frozen ice packs inside it.

Two ice packs are required for each air cooler so that you can be freezing one at all
times.