KINZO BL-168DLR Manuel D'utilisation page 3

1. On/Off/Speed button

After the plug is inserted into the socket, a buzzer will sound.
Press the button. The 'low' indicator on the control panel will light up, showing that air

cooler is working at low speed.
Press the button for a second time. The 'Med' indicator on the control panel will light up,

showing that air cooler is working at medium speed.
Press the button for a third time. The 'High' indicator on the control panel will light up,

showing that air cooler is working at high speed.

Press the button for a fourth time. The air cooler will stop working.
2. Cooler (Humidifying) button
Press the button when the air cooler is working. The 'Cooler' indicator (red) will light up

on the control panel.
Press the button for a second time when the air cooler is working. The 'Humidifying'

indicator (blue) will light up on the control panel.

Press the button for a third time when the air cooler is working. No indicator will be lit,
showing that the Cooler (Humidifying) functions are not working.
3. Swing button
Press the button while the air cooler is working. The 'Swing' indicator will light up and

the air filter will start moving from side to side.
Press the button a second time while air cooler is working. The 'Swing' indicator will go

out and the air filter will stop moving from side to side.
4. Timer button
Press the button while the air cooler is working. The '0.5H' indicator will come on and

the air cooler will stop working after half an hour.
Press the button for a second time while the air cooler is working. The '0.5H' indicator

will go out and the '1H' indicator will come on. The air cooler will stop working after an
hour.
Press the button for a third time while the air cooler is working. The '0.5H' indicator will

come on again and the '1H' indicator will stay on. The air cooler will stop working after
an hour and a half.
Press the button for a fourth time while the air cooler is working. The '0.5H' indicator

and the '1H' indicator will both go out. The '2H' indicator will come on. The air cooler
will stop working after two hours.
Press the button for a fifth time while the air cooler is working. The '0.5H' indicator will

come on again. The '1H' indicator will stay off and the '2H' indicator will stay on. The air
cooler will stop working after two and a half hours.
Press the button for a sixth time while the air cooler is working. The '0.5H' indicator will

go out. The '1H' indicator will come on again and the '2H' indicator stay on. The air
cooler will stop working after three hours.
The sequence is followed until you press the button for a fifteen time, when the '0.5H'
