Titan Pro V55 Guide D'utilisation page 5

Important Safety Information • Read all safety information
before operating the equipment. Save these instructions
HAzARD: GeNeRAL
May cause property damage or severe injury.
PReVeNTION:
1. Disconnect the heat gun from the power supply when not in use. Store indoors in a dry
place and out of the reach of children.
2. Keep your work area well lighted and clean.
3. Do not overreach, especially when working on ladders. Keep proper footing and balance
at all times. Be certain any ladders being used are sturdy, stable, on a firm surface and
erected at safe working angles.
4. Avoid power lines.
5. Keep moveable items secured and steady while scraping.
6. Always use protective eyewear when working.
7. Stay alert and use common sense when operating any tool.
Some dust, peelings, residue, and vapors caused by paint removal activities
contain chemicals known to the state of California to cause birth defects or
other reproductive harm. An example of a chemical would be lead from lead-
based paints (do not use a heat tool to remove lead-based paint). Your risk
from exposure varies, depending on how often you do this type of work. To
reduce your exposure to these chemicals: work in a ventilated area, and work
with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
Servicing of a double-insulated product
In a double-insulated product, two systems of insulation are provided instead of grounding.
No grounding means is provided on a double-insulated product, nor should a means for
grounding be added to the product. Servicing of a double-insulated product requires extreme
care and knowledge of the system, and should be done only by qualified service personnel.
Replacement parts for a double-insulated product must be identical to those parts in the
product.
All manuals and user guides at all-guides.com
5
English