Recording From An External Input; Recording From External Components; Recording From A Digital Camcorder - LG DR4810 Mode D'emploi

Recording from an External Input

Recording from External Components

You can record from an external component, such as a
camcorder or VCR, connected to any of the recorder's
external inputs.
Make sure that the component you want to
1 1
record from is connected properly to the DVD
Recorder. See page 16.
Press INPUT repeatedly to select the external
2 2
input to record from.
• Tuner: Built-in tuner
• AV1: EURO AV1 AUDIO VIDEO mounted on back panel
• AV2: EURO A/V2 DECODER mounted on back panel
• AV3: AUDIO AV IN 3 / VIDEO IN 3 mounted on back
panel
• AV4: INPUT 4 (VIDEO, AUDIO (L/R), S-VIDEO IN)
mounted on front panel
• DV: DV IN mounted on front panel
Load a recordable disc.
3 3
Select the recording mode as necessary by
4 4
pressing REC MODE repeatedly. (HQ, SQ, LQ)
HQ; High Quality, SQ; Standard Quality, LQ: Low Quality
Press REC (z) once.
5 5
Recording will start. (The REC indicator lights in the
display window.)
Recording continues until you press STOP (
disc is full.
To record for a fixed length of time, see Instant Timer
Recording on page 37.
Press STOP (x) to stop recording.
6 6
ote
If your source is copy-protected using CopyGuard, you will not
be able to record it using this recorder. See Copyright on page
7 for more details.
40
All manuals and user guides at all-guides.com

Recording from a Digital Camcorder

You can record from a digital camcorder connected to
the DV IN jack on the front panel of this recorder. Using
the recorder's remote, you can control both the cam-
corder and this recorder.
Before recording, make sure that the audio input for the
DV IN jack is set up (see page 25).
• The source signal must be DVC-SD format.
• Some camcorders cannot be controlled using this
• If you connect a second DVD Recorder using a DV
• You can't control this unit remotely from a component
• You can't record date and time information from a DV
1 1
2 2
x
) or the
3 3
4 4
5 5
ips
recorder's remote.
cable, you cannot control the second DVD from this one.
connected to the DV IN jack.
cassette.
Make sure your digital camcorder is connected
to the front panel DV IN jack. See page 16.
Check that the DV audio input is as you require.
You can choose between Audio 1 (original audio) and
Audio 2 (overdubbed audio).
• DV Input is set from the DV Rec Audio in sub-menu of
the Setup menu. See DV Rec Audio on page 25 for
more information.
Press AV repeatedly to select the DV input.
DV appears in the display window and on the TV screen.
Find the place on the camcorder tape that you
want to the recording to start from.
For best results, pause playback at the point from which
you want to record.
• Depending on your camcorder, you can use this
recorder's remote to control the camcorder using the
STOP, PLAY and PAUSE functions.
Press REC (z) once to start recording.
• Recording is automatically stopped if the recorder
detects no signal.
• You can pause or stop the recording by pressing
PAUSE/STEP (X) or STOP (x). You cannot
control the camcorder from this remote control
during recording.
• In Video mode, the final frame of the recording
may remain displayed on screen for a while after
recording stops.
• For timer recording to work properly on this
recorder, the digital camcorder must also be
switched on and in operating.