Height Adjustment - aidapt VG798 Instructions D'entretien

HEIGHT ADJUSTMENT

Your trolley can be adjusted in height if required.
To adjust the height remove the lower 'E' clips from the extension legs and
•
pull each leg to the desired height. (See fig. 1.)
Ensure that all four extension legs are evenly adjusted.
•
Re-insert all 'E' clips facing the line of travel also ensuring that the 'E' clips
•
have passed through the product frame and extension leg and are secure.
(See fig 2.)
Never adjust the legs unevenly; this is dangerous and can seriously
•
compromise the safety of the user.
Check that the trolley is sitting evenly on the floor and there is no excessive rocking
or the trolley is tilting to one side. If this is the case, please do not use the trolley,
but repeat the above steps to correct the problem or contact your supplier for
service support.
Usage and Maintenance Instructions
4
Ver. 1 06/2012 (1695)