Setting Up Anynet - Samsung 4 Serie Mode D'emploi

✎
NOTE
x
You must connect an Anynet+ device using an HDMI cable. Some HDMI cables may not support Anynet+ functions.
x
Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
x
Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
x
However, you can connect only one Home Theater.
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu
View TV
Device List
Recording: (*recorder)
Stop Recording: (*recorder)
(device_name) MENU
(device_name) INFO
Receiver
If you have connected more than one recording device, they are displayed as (*recorder) If you have connnected only one
recording device, it is displayed as (*device_name).

Setting Up Anynet+

¦
O
MENUm → Application → Anynet+ (HDMI-CEC) → ENTERE
■ Setup
Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
✎
When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.
Auto Turn Off (No / Yes): Set an Anynet+ Device to turn off automatically when the TV is turned off.
✎
If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the TV powers off.
However, a device may not turn off if recording is in progress.
✎
May not be enabled depending on the device.
Description
Changes Anynet+ mode to TV broadcast mode.
Shows the Anynet+ device list.
Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
Stops recording.
Shows the connected device menus. For example, if a DVD recorder is connected, the disc
menu of the DVD recorder will appear.
Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the
play menu of the DVD recorder will appear.
Sound is played through the receiver.
27
English