LaserLiner SuperPlane-Laser 3D Mode D'emploi page 11

Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents, scouring agents and solvents.
Remove the battery(ies) before storing for longer periods. Store the device in a clean and dry place.
Technical data
(Subject to technical alterations. 21W07)
Self-levelling range
Precision
Operating range
Working range with hand receiver
Laser wavelength
Laser class
Power supply
Operating time with 3 laser levels
with 2 laser levels
with 1 laser level
Operating conditions
Storage conditions
Weight (incl. batteries)
Dimensions (W x H x D)
EU directives and disposal
This device complies with all necessary standards for the free movement
of goods within the EU.
This product is an electric device and must be collected separately for disposal
according to the European Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at:
http://laserliner.com/info?an=supplalas3pl
SuperPlane-Laser 3D
± 3°
± 0.35 mm / m
(depending on room illumination) 15 m
(depends on how the technology affects the
difference in brightness) 40 m
650 nm
2 / < 1 mW
4 x 1.5 V alkaline batteries (type AA) /
rechargeable batteries
approx. 6 hours
approx. 10 hours
approx. 25 hours
0 ... 50°C, 80% rH, no condensation,
max. altitude 4000 m
-10°C ... 70°C, 80% rH, no condensation
650 g
85 x 125 x 130 mm
11
EN