Kärcher NT 611 Eco Mode D'emploi page 10

English
FAULT INSTRUCTIONS
The suction turbine does not run
• Check the cable, plug, fuse and
socket.
• Switch on the machine.
The suction turbine switches off
• Empty the container.
Suction force diminishes
• Remove clogging material from
the suction nozzle, suction pipe,
Power Filter Clean, suction hose,
or surface filter.
• Activate the remote control for
Power Filter Clean on the handle.
• Change the paper filter bag.
• Lock the filter cover in place.
• Cleaning/changing the surface
filter.
Dust ejects when sucking
• Check the surface filter is
positioned correctly.
• Change the surface filter.
NT 611 Eco / NT 611 Eco TE
Automatic switch-off
(wet suction) is defective
• Clean electrodes.
• Constantly check the filling level
for an electrical non-conductive
liquid.
Power Filter Clean switches
regularly
• Loosen suction nozzle or end of
hose when caught on vacuumed
object.
• End continuous suction from the
liquid container.
• Remove clogging material from
the suction nozzle, suction pipe,
Power Filter Clean, suction hose,
or surface filter.
• Change the surface filter.
10