Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
MSV350D-FINAL- 033009:Layout 1
3/30/09
All manuals and user guides at all-guides.com
AUTO MODE
When this mode is selected, the instrument can
detect STUD, VOLTAGE & METAL simultaneously.
Press and release selector switch until icon
appears on the LCD screen. At this moment, auto
calibration will start by displaying the scanning
bars from bottom of the scanning indicators. This
procedure will complete when the scanning
indicators show a full scale of reading and
disappear quickly. At the same time, the scan
symbol will display on the LCD screen with a
short "beep" tone. The instrument is ready for
Auto Mode Scanning. For scanning procedure,
please refer to Sections 1, 2 & 3. In case of Stud,
Voltage and Metal being detected at the same
time, all four icons will show on the display.
BATTERY LEVEL INDICATOR
This shows current status of battery. Full
segments indicate battery in perfect condition.
Three segments indicate battery in good
condition and two segments indicate battery in
normal condition. When one segment or no
segment appears, replace battery immediately.
AUTO-POWER OFF
The instrument will turn off automatically when
not in use in about 3 minutes.
9
Publicité
Table des Matières
