Battery Installation - General MSV350D Mode D'emploi

MSV350D-FINAL- 033009:Layout 1
All manuals and user guides at all-guides.com
DESCRIPTION
1. Metal/Voltage Sensor Location
2. Marking Hole for Stud Edge
3. LCD Screen
4. Power & Function Selector Switch
5. Scan Switch
6. "SCAN" Symbol (This icon will appear when
7. Scanning Indicators (Full scale reading will
8. Battery Level Indicator
9. Metal Symbol (This icon will appear when
10. Voltage Symbol & Warning Indicator (These
11. Stud Symbol (This icon will appear when
12. Auto Mode (This icon will appear when
13. Stud Sensor Location
14. Battery Cover
OPERATING INSTRUCTIONS

BATTERY INSTALLATION

This unit is operated by one "9V" battery which is
not included.
• Slide open the battery cover on the back of the
instrument
• Attach the battery to the battery connector and
insert it into the battery compartment.
• Slide the battery cover back into place.
2
calibration is completed)
display when a target is being detected)
metal detector is being used or when metal
object is detected when auto mode is
selected)
icons will appear when voltage detector is
being used or when voltage is detected
during auto mode)
stud detector is being used or when a stud
edge is detected during the auto mode
selection)
performing metal, voltage and stud
detections simultaneously)
3/30/09