Before First Use; Care And Cleaning - Klarstein Iceblokk Mode D'emploi

EN
16

BEFORE FIRST USE

• Before use, remove all packing materials, including bottom cushions, foam pads
and tapes inside of the freezer; tear off the protective film on the doors and the
freezer body.
• Keep away from heat and avoid direct sunlight. Do not place the freezer in moist or
watery places to prevent rust or reduction of insulating effect.
• Do not spray or wash the freezer; do not put the freezer in moist places easy to
be splashed with water so as not to affect the electrical insulation properties of the
freezer.
• The freezer is placed in a well-ventilated indoor place; the ground shall be flat, and
sturdy (rotate left or right to adjust the wheel for levelling if unstable).
• The top space of the freezer shall be greater than 70 cm, and The freezer should
be placed against a wall with a free distance more than 20 cm to facilitate heat
dissipation.

CARE AND CLEANING

Defrosting
The freezer is made based on the air-cooling principle and thus has automatic defrosting
function. Frost formed due to change of season or temperature may also be manually
removed by disconnection of the appliance from power supply or by wiping with a dry
towel.
Out of operation
• Power failure: In case of power failure, even if it is in summer, foods inside the
appliance can be kept for several hours; during the power failure, the times of door
opening shall be reduced, and no more fresh food shall be put into the appliance.
• Long-time nonuse: The appliance shall be unplugged and then cleaned; then the
doors are left open to prevent odor.
• Moving: Before the freezer is moved, take all objects inside out, fix the glass
partitions, vegetable holder, freezing chamber drawers and etc. with tape, and
tighten the leveling feet; close the doors and fix them with tape. During moving,
the appliance shall not be laid upside down or horizontally, or be vibrated; the
inclination during movement shall be no more than 45°.