Operation; Before First Use - Klarstein 10030107 Mode D'emploi

Operation

Before first Use

Before using the appliance for the first time, wash the interior and all internal accessories
with lukewarm water and some neutral soap so as to remove the typical smell of a brand
new product, then dry thoroughly. Do not use detergents or abrasive powders, as these
will damage the finish.
Temperature settings
Press MODE 1x : the lamp of "sup" is lighted on, and the appliance would be fast freezing and the LED
displays (super freezing).
Press MODE 2x : , the fasting freezing lamp !lack out, and the "Eco" lamp is lighted on, the appliance would go
into "Eco" mode, the appliance will run with the setting at -16 °C and the LED will display "SE" (save energy ).
Press MODE 3x :drücken: both of lamps of "sup" and "Eco" black out, the appliance would be back to setting
mode by user.
The mode is cycling to change during „Sup", „Eco" und „Setting".
26