Setting Programmable Positions And Pairing Remote - Ashley M9X432 Manuel Du Propriétaire

Setting Programmable Positions
and Pairing Remote
The original remote that comes in the box is already paired to the foundation. No further action is required.
In the event that the remote is not paired with the foundation, follow the steps below.
M9X4/M9X5 PAIRING REMOTE
STEP 1
Make sure the batteries work fine. Replace them
when needed.
STEP 2
Unplug the power cord from the power source.
STEP 3
Press and hold HEAD and FLAT
simultaneously until the blue backlights of
the remote control are off.
STEP 4
Plug the power cord back into the power source. You will hear a beep
sound in 2 seconds; the remote is then paired.
ASZG3000M PAIRING REMOTE
STEP 1
Make sure the batteries work fine. Replace
them when needed.
STEP 2
Unplug the power cord from the power source.
STEP 3
Press and hold SELECT
button until the LCD
screen of the remote
control shows PAIR.
STEP 4
Plug the power cord back into the power source. You will hear a
beep sound in 2 seconds; the remote is then paired.
All manuals and user guides at all-guides.com
Customer Service Toll Free: 1 ( 800 ) 248-5988
—08—
SETTING PROGRAMMABLE POSITION
The M9X6 power bed has a programmable feature that allows you
to save two custom positions.
Please read all the instructions below before setting your custom
presets on the remote.
STEP 1
Adjust the head and foot to your
desired position.
STEP 2
Press and hold the LED on/off button
the LCD screen shows SAVE, and press picture programmable
buttons until you hear 2 beep sounds.
STEP 3
To adjust a saved position, repeat step 1 and 2 and the new
position will be saved.
SETTING REMOTE LOCK
The M9X6 power bed has a lock feature that allows you to lock the
remote. Read all the instructions below.
LOCK
Press and hold HOME
and SELECT buttons
simultaneously for about 5
seconds until the LCD screen
shows LOCK.
UNLOCK
Press and hold HOME and SELECT
seconds until the LOCK disappears on the LCD screen.
LOW BATTERY
The LCD screen will show LOW once
the batteries are in low power.
for about 5 seconds until
buttons for about 5