Asus WL-330NUL Mode D'emploi page 3

•
Use WL-330NUL as a portable router
In circumstances of weak wireless signal or Ethernet network alone, such as in a
hotel, conference room or office, follow the steps below to access the Internet
through WL-330NUL.
1. Connect the Ethernet cable to WL-330NUL and
plug it into a power outlet.
2. When the LED indicator stops blinking and
turns into a solid light in about 30 seconds, it
indicates that WL-330NUL has finished booting
up.
3. Select WL-330NUL's private network name. The
default network name is WL-330NUL-private-
xxxx (xxxx is the last four numbers of
WL-330NUL's MAC address).
4. Enter the private network password, which
you can find on your WL-330NUL labeled as
supervisor code.
5. Launch your web browse.
U7564_WL-330NUL_QSG.indb 3
MAC address
Supervisor code: xxxxxxxx
Internet
3
12/29/12 1:23:55 PM