Axis YP3040 Mode D'emploi page 7

YP3040 Installation Guide
Setup
When you install a compatible Axis network camera on the YP3040 Pan-Tilt Motor, the controls will
be available from the Live View page in the camera's web pages after enabling the PTZ functionality
in Setup tools. Follow these instructions to enable PTZ functionality in the camera:
1. Go to Setup > System Options > Ports & Devices > COM Port in the camera's web pages, and
set Usage to Pan Tilt.
2. Refer to the User's Manual supplied with your product for instructions on how to configure the
PTZ settings.
All manuals and user guides at all-guides.com
Network camera
Network cable
(Ethernet RJ-45 to camera)
PTZ control cable
(RS-485 to camera)
Power supply cable
(24 V AC from mains adaptor)
Mains
adaptor
Page 7