Axis YP3040 Mode D'emploi page 11

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

YP3040 Installation Guide
Safeguards & warnings
Please read through this Installation Guide carefully prior to installing your product. Keep
the Installation Guide for further reference.
Turn off the power before cleaning the motor. Do not use chemicals, caustic agents, or
aerosol cleaners. Use a damp cloth for cleaning.
Only use accessories and replacement parts provided or recommended by Axis.
Use 24 V AC power supply only, AXIS PS24 Mains Adaptor is recommended.
Protect the power supply cable from any damage; pay special attention to plug fittings,
extensions and outputs.
Install a surge protector to protect the motor from power surges.
Avoid using excessively long installation wires in order to prevent fire or electrical shocks.
Do not remove the covers or repair the product by yourself, contact Axis or your Axis
reseller for service matters.
!
IMPORTANT! - Keep the motor clear of unidentified objects or corrosive liquids since
that may cause the motor to short circuit.
!
IMPORTANT! - Do not install the motor on unstable brackets, unstable or vibrating
surfaces or walls, since this may cause injury to people or damage the motor.
!
IMPORTANT! - Do not touch the motor during operation.
!
IMPORTANT! - Do not install or operate the motor on dangerous sites that store
inflammable or explosive objects.
All manuals and user guides at all-guides.com
Page 11

Publicité

Table des Matières
loading

Table des Matières