Publicité
1. Charging
Charge the headphones fully prior to usage by using the USB cable Included.
• 0 % to 49 % charged: Charging LED indicator slowly fl ashes red
• 50 % to 99 % charged: Charging LED indicator fl ashes red
• 100% charged:
It will take approx. 2 hours from empty to full charge.
2. Wearing
Adjust the slider length to fi t your head when wearing the headphones.
3. Pairing with Bluetooth device
Register (Pairing) a Bluetooth device to the headphones.
1. Activate Bluetooth function of the Bluetooth device to be connected.
2. With the headphones' Bluetooth function off , press and hold the control button for
approx. 4 seconds. The red and blue LEDs will alternately fl ash, and the headphones will
enter pairing standby mode.
3. Select the "DENON AH-GC20" appears on the Bluetooth device to be connected.
The blue LED indicator will light up for approx. 5 seconds when pairing has been
completed.
Web Manual
Refer to the web manual for other functions information and operation
procedure details, such as cable connection, remaining battery indication,
Multi-point connection, Voice guidance, and so on.
Enter the following URL into your web browser:
manuals.denon.com/AHGC20/ALL/EN/
1
AH-GC20EM_ENG-FRA_141113.indd
1
Charging LED indicator lights red
2014/11/13
9:53:57
Publicité
