Publicité
1. Charging
1
AH-GC30EM_QSG_181203.indd
Bluetooth LED
Charge this unit using the included USB cable
before using.
The battery LED indicates the battery charge status.
• Charging: Lights red
• Charging completed: Lights green
It will take approx. 2 hours from empty to full charge. This unit can be used for
approximately 20 hours when the battery is fully charged.
When the rechargeable battery is low, a notification sounds and the battery LED blinks in
red at approx. 3 second intervals.
Charge this unit using the supplied USB cable.
• Press and hold the 1/3 button for 3 seconds or more to turn the Bluetooth function off
or the NC button for 2 seconds or more to turn the noise cancel function off after use and
preserve the battery.
1
Battery LED
NC LED
R
R
2018/12/04
16:29:25
Publicité
