Zanussi ZFC649WAP Notice D'utilisation page 13

• It is dangerous to alter the specifications or
modify this product in any way. Any damage
to the cord may cause a short-circuit, fire
and/or electric shock.
Warning! Any electrical component (pow-
er cord, plug, compressor) must be re-
placed by a certified service agent or qualified
service personnel to avoid hazard.
1. Power cord must not be lengthened.
2. Make sure that the power plug is not
squashed or damaged by the back of
the appliance. A squashed or damaged
power plug may overheat and cause a
fire.
3. Make sure that you can come to the
mains plug of the appliance.
4. Do not pull the mains cable.
5. If the power plug socket is loose, do not
insert the power plug. There is a risk of
electric shock or fire.
6. You must not operate the appliance
without the lamp cover (if foreseen) of
interior lighting.
• This appliance is heavy. Care should be tak-
en when moving it.
• Do not remove nor touch items from the
freezer compartment if your hands are damp/
wet, as this could cause skin abrasions or
frost/freezer burns.
• Avoid prolonged exposure of the appliance
to direct sunlight.
• Bulb lamps (if foreseen) used in this appli-
ance are special purpose lamps selected for
household appliances use only. They are not
suitable for household room illumination.
Daily Use
• Do not put hot pot on the plastic parts in the
appliance.
• Do not store flammable gas and liquid in the
appliance, because they may explode.
• Do not place food products directly against
the air outlet on the rear wall. (If the appli-
ance is Frost Free)
• Frozen food must not be re-frozen once it
has been thawed out.
www.zanussi.com
All manuals and user guides at all-guides.com
• Store pre-packed frozen food in accordance
• Appliance's manufacturers storage recom-
• Do not place carbonated or fizzy drinks in the
• Ice lollies can cause frost burns if consumed
Care and cleaning
• Before maintenance, switch off the appliance
• Do not clean the appliance with metal ob-
• Do not use sharp objects to remove frost
Installation
Important! For electrical connection carefully
follow the instructions given in specific
paragraph.
• Unpack the appliance and check if there are
• It is advisable to wait at least four hours be-
• Adequate air circulation should be around
• The appliance must not be located close to
• Make sure that the mains plug is accessible
Service
• Any electrical work required to do the servic-
with the frozen food manufacturer's instruc-
tions.
mendations should be strictly adhered to.
Refer to relevant instructions.
freezer compartment as it creates pressure
on the container, which may cause it to ex-
plode, resulting in damage to the appliance.
straight from the appliance.
and disconnect the mains plug from the
mains socket.
jects.
from the appliance. Use a plastic scraper.
damages on it. Do not connect the appliance
if it is damaged. Report possible damages
immediately to the place you bought it. In that
case retain packing.
fore connecting the appliance to allow the oil
to flow back in the compressor.
the appliance, lacking this leads to overheat-
ing. To achieve sufficient ventilation follow
the instructions relevant to installation.
radiators or cookers.
after the installation of the appliance.
ing of the appliance should be carried out by
a qualified electrician or competent person.
13