Connections With Tv Using Optical (Digital) Cable; Auto Power Link - Samsung HW-J6000 Mode D'emploi

CONNECTIONS WITH TV USING OPTICAL (DIGITAL) CABLE

1. Connect OPTICAL IN (Audio) on the Soundbar to the OPTICAL OUT jack of the TV.
2. Press the (Source) button on the top panel of Soundbar or the SOURCE button on remote control to select
the D.IN mode.

+ Auto Power Link

If you have connected the main unit to a TV with a digital optical cable, set the Auto Power function ON to have
the Soundbar turn on automatically when you turn the TV on.
AUTO POWER LINK
ON
OFF
1. Connect the Soundbar and a TV with an Optical cable (not supplied).
2. Press the (Source) button on the main unit's top panel or the SOURCE button on the remote control to
select the D.IN mode.
3. Press the AUTO POWER button on the remote control to toggle the Auto Power Link function on and off.
● Depending on the connected device, Auto Power Link may not function.
Optical Cable
(not supplied)
OPTICAL OUT
Display
OFF - ANYNET+ / ON - POWER LINK
ON - ANYNET+ / OFF - POWER LINK
OPTICAL IN
DC 14V HDMI IN
AUX IN
HDMI OUT 5V 0.5A
OPTICAL IN (TV-ARC)
19
CONNECTIONS