Samsung HW-M450 Mode D'emploi page 32

Masquer les pouces Voir aussi pour HW-M450:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6. Use the two Screws (M4 x L12) to attach both
Bracket-Wall Mount L and R to the
Soundbar's bottom.
For a proper fit, make sure to align the
bumps on the Soundbar to the holes on the
brackets.
• When assembling, make sure the hanger
part of the Bracket-Wall Mounts are
located behind the rear of the Soundbar.
Right end of Soundbar
Rear of Soundbar
ENG - 28
• The left and right mounts are different
shapes. Make sure to position them
correctly.
Wall Mount R
7. Install the Soundbar with the attached
Bracket-Wall Mounts by hanging the
Bracket-Wall Mounts on the Holder-Screws
on the wall.
• Slightly tilt the Soundbar to insert both
Holder-Screw heads into Bracket-Wall
Mount holes. Push the Soundbar in the
direction of the arrow to make sure both sides
are firmly fixed.
Wall Mount L

Publicité

Table des Matières
loading

Table des Matières