Samsung HW-M450 Mode D'emploi page 27

Masquer les pouces Voir aussi pour HW-M450:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles


Up/Down/
Bluetooth
Surround
POWER
Left/Right
SOUND
MODE
VOL
WOOFER

Bluetooth
POWER
Bluetooth
POWER
SOUND
MODE
VOL
WOOFER
Press the indicated areas to select Up/Down/Left/Right.
Press Up/Down/Left/Right on the button to select or set functions.
• Repeat
To use the Repeat function in "USB" mode, press the Up button.
• Music Skip
Press the Right button to select the next music file. Press the Left button to select
the previous music file.
• Anynet+ / Auto Power Link
You can turn Anynet+ and Auto Power Link on or off.
Anynet+ and Auto Power Link are controlled by the Right and Left buttons
respectively.
– Anynet+ : If the Soundbar is connected to a Samsung TV through an HDMI cable,
you can control your Soundbar with a Samsung TV remote control.
Press and hold the Right button for 5 seconds to toggle Anynet+ ON and OFF.
– Auto Power Link : If the Soundbar is connected to your TV through a digital
optical cable, the Soundbar can automatically turn on when you turn on your TV.
Press and hold the Left button for 5 seconds to toggle Auto Power Link ON and
OFF.
– Anynet+ / Auto Power Link are set to ON by default.
Press to turn the Bluetooth POWER or volume restriction function on and off.
• Bluetooth POWER function : If the Soundbar is in standby mode and the Bluetooth
POWER function is On, when you turn on a previously connected Bluetooth device,
the Soundbar automatically turns on and connects via Bluetooth to the device.
– When the Bluetooth POWER function is on, "ON-BLUETOOTH POWER" appears
on the Soundbar display. To turn off the Bluetooth POWER function, press the
Bluetooth POWER button once. Then "OFF-BLUETOOTH POWER" appears on
the front display.
– If the "D.IN" mode is on and the Soundbar is connected to a Samsung smart TV
released in 2017 or later, the Soundbar can be controlled with the TV remote
control. In this mode, you cannot turn off Bluetooth POWER.
• Volume restriction function : Because it may damage hearing when the power is
turned on at high volumes, it adjusts the volume to 20 when the set volume is higher
than 20.
– The default value for Volume restriction is off. The set volume is maintained
even when the power is turned off.
– To change the setting, press the Bluetooth POWER button on the remote
control for 5 seconds. With the volume restriction off, "V FREE" appears on the
front display and with the function on, "V LOCK" appears.
ENG - 23

Publicité

Table des Matières
loading

Table des Matières