Setting Up The Video(Display) Options; Input Level; Black Level - Samsung DVD-VR355 Manuel D'instructions

DVD-Recorder
Audio
No Disc
Timer Rec.
Digital Output : PCM
Setup DTS : Off
Dynamic Compression On
Off
On
MOVE ENTER RETURN EXIT
DVD-Recorder Video
No Disc
Timer Rec.
TV Aspect 4:3 Letter Box : 16:9 Wide
Setup

Input Level

: Darker 4:3 Pan & Scan

Black Level

: 7.5 IRE
16:9 Wide
3D Noise Reduction : Off
HDMI/DVI Resolution : 480P
DivX(R) Registration
MOVE ENTER RETURN EXIT
DVD-Recorder Video
No Disc
Timer Rec.
TV Aspect : 16:9 Wide
Setup
Input Level : Darker
Darker
Black Level : 7.5 IRE Lighter
3D Noise Reduction : Off
HDMI/DVI Resolution : 480P
DivX(R) Registration
MOVE ENTER RETURN EXIT
DVD-Recorder
Video
No Disc
Timer Rec.
TV Aspect : 16:9 Wide
Setup
Input Level : Darker
0 IRE
Black Level : 7.5 IRE
3D Noise Reduction : Off 7.5 IRE
HDMI/DVI Resolution : 480P
DivX(R) Registration
MOVE ENTER RETURN EXIT
▌ Dynamic Compression
This is only active when a Dolby Digital signal is detected.
• On : When the Movie soundtracks are played at low volume or from
►
► small speakers, the system can apply appropriate compression
►
to make low-level content more intelligible and prevent dramatic
passages from getting too loud.
• Off : You can enjoy the movie with the standard Dynamic Range.

Setting Up the Video(Display) Options

This function allows you to setup the TV screen settings.
1. With the unit in Stop mode/No Disc mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the ENTER or ►
button.
3. Press the ▲▼ buttons to select Video, then press the ENTER or ►
button. Video option menu will be displayed.
4. Press the ▲▼ buttons to select the desired video option, then press
the ENTER or ► button.
5. Press the ▲▼ buttons to select the desired item, then press the
ENTER or ► button.
■ Press the RETURN or ◄ button to return to the previous menu.
Press the EXIT button to exit the menu.
▌ TV Aspect
Depending on the type of television you have, you may want to
►
adjust the screen setting. (aspect ratio)
►
►
• 4:3 Letter Box : Select when you want to see the total 16:9 ratio screen
►
that a DVD supplies. Even though you have a TV with a 4:3 ratio screen,
►
black bars will appear at the top and bottom of the screen.
►
• 4:3 Pan & Scan : Select this for a conventional size TV when you want
to see the central portion of the 16:9 screen. (Extreme left and right side
of movie picture will be cut off.)
• 16:9 Wide : You can view the full 16:9 picture on your wide-screen TV.
▌ Input Level
Adjusts the level of the input signal.
►
► • Darker : If you feel the screen is too light and you want to make the
►
screen darker.
►
• Lighter : If you feel the screen is too dark and you want to make the
►
►
screen lighter.
▌ Black Level
Adjusts the black level of the screen.
►
• 0 IRE : This is the standard NTSC reference black level for consistent
►
► brightness/contrast across all sources. Select this when you want to
►
make the screen darker.
►
• 7.5 IRE : This will enhance the black level for increased brightness/
►
contrast when viewing DVDs. Select this when you want to make the
screen lighter.
English - 33