Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
• When you click the Click Me! icon, your system will automatically
build the icon tray in the bottom right of the screen. Other utilities
(e.g. Bluetooth) and drivers may be installed. Icons will be created
that provide links to applications/utilities that you will frequently
access. Once Click Me! is completed the system will reboot.
8. Create backup media with
myRecovery (Hard Disk Drive
recovery models only)
Recovery discs (for your pre-loaded factory image) are NOT
included with LifeBooks that are shipped with MyRecovery.
If your hard drive crashes or the computer system becomes
corrupted, you can use the recovery discs that you create
to restore the system to its original condition.
• Click on the [MyRecovery] icon on the desktop to create backup
recovery media and application discs.
• Refer to the "Restoring Your System Image and Software"
in your User's Guide for more detailed instructions.
9. Access your User's Guide
• To take advantage of all the features of your new Fujitsu LifeBook
notebook, it is highly recommended that you review your electronic
User's Guide. It contains important detailed information about your
new computer. You can access your User's Guide by selecting its
icon from the screen desktop. You will need to be connected to
the Internet. Or you can go directly to your support website
at http://www.fujitsu.com/us/support/ and download the
appropriate User's Guide.
Common Indicators
Status Display Panel
The Status Display Panel is located below the keyboard. The indicators are
only visible when the unit is on. Following are some common indicators.
If the battery pack is installed while the power is
turned off, the battery level indicator will display the
charge level for fi ve seconds after it blinks orange.
Wireless Status Indicator
Blue, solid: Wireless devices have
been switched on (using the
[Fn]+[F5] key combination) and
is connected to the network.
Off: Wireless devices are off.
Power Status Indicator
Blue, solid: AC adapter and battery
are available and system is fully
charged, or AC adapter is plugged
in but battery is not installed.
Blue, blinking: AC adapter and
battery are available and the
system is in sleep mode.
Off: AC adapter is not plugged in.
Battery Level Indicator
The Battery Level indicator displays
the charge level of the battery
pack, as follows.
With AC Adapter connected:
Blue, solid: AC adapter is connected
and battery is charged.
Orange, solid: AC adapter is connected
and battery is charging.
Without AC Adapter connected:
Orange, blinking: Blinks when the
battery charge level is 12% or less.
Purple, blinking: There is a
problem with the battery.
Off: There is no AC Adapter connected
and/or the battery charge level is
between 13% and 100%
4
All manuals and user guides at all-guides.com
If the battery pack is installed while the power is
turned off, the battery level indicator will display the
change level for fi ve seconds after it blinks orange.
If the AC adapter is not connected or the battery pack
is not fully charged when the computer is switched to
standby mode, the indicator will blink. The LED blinks
at the rate of one second on/six seconds off.
Batteries subjected to shocks, vibration or extreme
temperatures can be permanently damaged.
A shorted battery is damaged and must be replaced.
Hard Drive/optical Drive Access Indicator
Glows green when your internal hard
drive is being accessed. Note that
fl ickering is normal.
NumLk Indicator
Glows when the integral keyboard
is set in ten-key numeric
keypad mode.
CapsLock Indicator
Glows when your keyboard is
set to type in all capital letters.
Quick Tips
It takes approximately 4 hours to
charge a fully discharged single
battery with unit off or in
suspend mode.
optimizing Battery Life
• Set power management setting
for best battery life.
• Adjust display brightness levels
to lowest comfortable setting.
• Utilize Suspend mode when
not using your notebook.
• Read the Power Management
section in your electronic User's
Guide for additional features.
Adjusting Display Brightness
• Fn + F6 to decrease brightness
• Fn + F7 to increase brightness
Adjusting Volume
• Fn + F8 to decrease volume
• Fn + F9 to increase volume
Publicité
Table des Matières
