Choke Lever - Haojue HJ125-8 Manuel D'utilisation

CHOKE LEVER 6 (HJ125-8NEW)
(A) (B)
To make starting convenient, the motorcycle is provided
with a choke. During a cold engine start, pull the choke
lever to the position (A) and open throttle grip slightly to
start the engine. After the engine is started, pull back
the choke lever by half to position (B) and open throttle
grip slightly to make the engine continually preheat until it
reaches the required temperature. Finally, pull the choke
lever back to its original position (C). During a hot engine
start, put the choke lever in position (C).

CHOKE LEVER

(HJ125-8)
To make starting convenient, the
motorcycle is provided with a choke.
During a cold engine start, pull the
choke lever to the position (A) and
open throttle grip slightly to start
the engine. After the engine is
started, pull back the choke lever
by half to position (B) and open
throttle grip slightly to make the
engine continually preheat until it reaches the required
All manuals and user guides at all-guides.com
Haojue HJ125-8 99011H30220H000 V02 EN+FR 2015-3-2
temperature.
original position (C). During a hot engine start, put the
choke lever in position (C).
RIGHT HANDEL SWITCHES
(C)
HJ125-8 VERSION (A)
ENGINE
STOP SWITCH 1 (HJ125-8)
The engine can only start up
when the switch is placed at
the "*" position, and the ignition
circuit is connected. If the switch
is at the "%" position, the ignition
circuit is cut off.
emergency stop switch.
ELECTRIC STARTUP BUTTON 2 #
This button is used for operating the starter motor. With
the ignition switch at the "*" position, the engine stop
switch at "*" and the transmission in neutral, grasp the
clutch lever and push the electric starter button # to
operate the starter motor to start the engine.
13
Haojue HJ125-8 99011H30220H000 V02 EN+FR 2015-3-2
Finally, pull the choke lever back to its
Accelerate
HJ125-8NEW
HJ125-8 VERSION (B)
This is an
(15)
EN
Accelerate
Accelerate
(15)