Whirlpool WDTA50SAK Mode D'emploi page 3

OPENING/CLEARANCE DIMENSIONS
IMPORTANT: Check that all surfaces have no protrusions that would prohibit dishwasher installation.
A. Measured from the lowest point on the underside of the countertop. May be reduced to 335/8" min. (85.4 cm) min. by removing the
feet and perforated area of insulation (blanket) on dishwasher.
B. Minimum, measured from narrowest point of opening.
NOTE: Corner locations require a 2" (5.1 cm) minimum clearance between the side of the dishwasher door and the wall or cabinet.
Because Whirlpool Corporation policy includes a continuous commitment
to improve our products, we reserve the right to change materials and
specifications without notice.
"
24
DETAILED PLANNING DIMENSIONS GUIDE
24"
(62.0 cm)
335/8" min.
(85.4 cm) min.
4"
(10.2 cm)
A
3"
(7.6 cm)
Dishwasher
24"
(62.0 cm)
B
Dimensions are for planning purposes only. For complete details, see
Installation Instructions packed with product. Specifications subject to
change without notice.
3
NOTE: Shaded areas
of cabinet walls
show where utility
connections may be
installed.
6¼"
(15.9 cm)
2"
(5.1 cm)