inventiv 202093 Notice page 16

All manuals and user guides at all-guides.com
You must read operating instructions before using the tool. Keep operating instructions
with the tool. Keep operating instructions with the hammer, so that they may be referred to,
if necessary.
1. TECHNICAL DATA
Voltage
Power input
No load speed
Impact rate
Protection class
Max drilling capacity
- Masonry/Steel/Wood
Max. chuck capacity
A weighted sound pressure L
A weighted sound power L
Vibration a : (K=1,5m/s²)
h
- Hammer drilling into concrete
- Chiseling
Accessories in packing
-
The declared vibration total value may be used for comparing one tool with another, and may
also be used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can differ from
the declared value depending on the ways in which the tool is used dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being drilled.
- The tool being in good condition and well maintained.
- The use the correct accessory for the tool and ensuring it is sharp and in good condition.
- The tightness of the grip on the handles and if any anti vibration accessories are used.
- And the tool is being used as intended by its design and these instructions.
202093 ROTARY HAMMER 1500W
: (K=3dB(A))
PA
: (K=3dB(A))
WA
16
SAFETY AND OPERATING MANUAL
230-240V ~50Hz
1500W
850/min
4400/min
II
Ø32mm / Ø13mm / Ø 40mm
SDS
Ø13mm (Manual chuck)
96,4 dB(A)
107,4 dB(A)
19,372 m/s²
17,879 m/s²
Electric hammer
Assistant handle
Depth gauge