Cleaning And Maintenance; Technical Specifications - Velleman RCQC1 Mode D'emploi

Switch on your remote control. The LEDs
should burn steadily.
11. Troubleshooting
No response from the quadcopter.

The battery of the quadcopter is insufficiently charged. Charge the battery.

The batteries of the remote control are insufficiently charged. Charge or replace the batteries.

The bandwidths of the remote control and the quadcopter do not correspond. Choose the
same bandwidth for both the remote control and the quadcopter.
The quadcopter is slow to respond or difficult to manoeuvre.

The battery of the quadcopter is insufficiently charged. Charge the battery.

The batteries of the remote control are insufficiently charged. Charge or replace the batteries.

The quadcopter is out of remote control's range. Do not fly the quadcopter too far from the
remote control. The range depends on the environment and surrounding objects.
12.

Cleaning and Maintenance

The quadcopter does not need any particular maintenance. However, occasionally wipe it with a damp
cloth to keep it looking new. Do not use harsh chemicals, cleaning solvents or strong detergents.
13.

Technical Specifications

transmitter channels
control signal
material
power supply
quadcopter
transmitter
charging time
flying time
control range
charging mode
quadcopter dimensions
V. 01 – 29/05/2015
RCQC1
4
2.4 GHz
plastic and electronic parts
rechargeable 3.7 V, 500 mAh lithium-polymer (incl., spare battery:
RCQC1/SP1)
4 x 1.5 V AA/LR6C (not incl.)
60-90 min
7-8 min
50 m (approx.)
via USB cable (incl.)
32 x 32 x 8 cm
9
Place the quadcopter on a flat surface. Push
the throttle and cyclic sticks to the bottom-
right corner until the LEDs blink rapidly.
Release the sticks. Resetting has been
completed when the LEDs burn steadily. Re-
synchronize the remote control and
quadcopter as described above.
©Velleman nv