Explaining The Remote Control's Display; Charging The Battery - Velleman RCQC1 Mode D'emploi

Explaining the Remote Control's Display

6.2
01
fine-tuning lateral flight right/left (mode 1) or rotation right/left (mode 2)
—> centred at power-on
02 fine-tuning forward/backward flight
—> centred at power-on
03 fine-tuning rotation right/left (mode 1) or lateral flight right/left (mode 2)
—> centred at power-on
04 throttle left/right indication
—> minimum value at power-on
05 forward indication
—> centred at power-on
06 backward indication
—> centred at power-on
07 lateral left indication
—> centred at power-on
08 lateral right indication
—> centred at power-on
09 rotation left indication
—> minimum value at power-on; the higher the value, the faster your quadcopter will rotate
10 rotation right indication
—> minimum value at power-on; the higher the value, the faster your quadcopter will rotate
11 speed indication
—> press button A to toggle between high-speed mode (H) and low-speed mode (L)
12 battery power indication
13 default mode indication
14 radio signal indication
7. Preparing Your Flight
7.1

Charging the Battery

1. Make sure your quadcopter is switched off. Slide the battery cover to open the battery
compartment.
2. Disconnect the battery wire and remove the battery from the quadcopter.
V. 01 – 29/05/2015
RCQC1
5 ©Velleman nv