auna Soundblaster DAB Mode D'emploi page 44

EN
44
playing. The display will show total number of USB.
5. Proceed program play/repeat play (repeat 1- repeat folder - repeat all)/
random play/intro play operation as the same described in above "CD/
MP3 operation".
Attention: Do not use any USB extension cable for connecting the USB bar
which may cause harmful interference.
SD CARD OPERATION
1. Press the FUNC. button on the unit or on the remote control to select
"CARD" mode.
2. Connect the SD CARD to the SD INPUT. The LCD will show the total
number of tracks stored in the SD CARD. The playback stars from track 1
automatically after reading.
3. To pause playback, press
⏯
/SELECT key on the remote control. The current playing time will flash
on the display.
To resume playback, press
⏯
/SELECT key on the remote control again.
4. Press the STOP button on the unit or on the remote control to stop
playing. The display will show total number of SD.
5. Proceed program play/repeat play (repeat 1- repeat folder - repeat all)/
random play/intro play operation as the same described in above "CD/
MP3 operation".
6. It supports 32GB (SD CARD)
BT OPERATION
1. Press the FUNC. button on the unit or on the remote control to switch
to BT function, the LCD will display "bT " and the Pair/Standby indicator
will flash at high speed.
2. Turn on the BT function on the device, scan the unit " Soundblaster DAB"
and connect, then input the password 0000 if required, the Pair/Standby
blue light will light up to indicate connection done, and the display will
show "BT MODE". Press
on the device to start playback. If the unit can't connect the relative BT
within 2 minutes, press the
key on remote control to reconnect.
3. Rotate the VOLUME knob to your desired level.
⏮
4. Press ⏭/+10 or
/-10 button on the unit or
the remote control to choose the desired track.
5. To stop playback, press
⏯/PAIR/SELECT
button on the unit or
⏯/PAIR/SELECT
button on the unit or
⏯/PAIR/SELECT
button on the unit or play key
⏯/PAIR/SELECT
button on the unit or PAIR
TUN+/⏭
⏯/PAIR/SELECT
button on the unit or
TUN-/⏮
or key on
⏯
/SELECT