Exhaust Hose Installation - Black & Decker BPACT12H Serie Manuel D'utilisation

All manuals and user guides at all-guides.com
SET UP & USE

EXHAUST HOSE INSTALLATION

The air exhaust hose and hose inlet must be installed or removed from the portable
COOL, DEHUMIDIFY, AUTO, HEAT
FAN
conditioner.
1. Connect hose inlet to one end of air exhaust hose. Push hose inlet over the end
of the hose, push in slightly and then start threading it on in a counter clockwise
2. Connect hose outlet to other end of air exhaust hose. Push hose outlet over the
end of the hose, push in slightly and then start threading it on in a counter
3. Align window bracket/air intake hose connector with hose outlet and push in until
4. Place the hose inlet against the air outlet opening hook on the back of the portable
5. After connecting the hose inlet to the unit, insert the window bracket/air intake
hose connector into the opening of the window bracket. Align connector with the
until it locks into place. You will hear a clicking sound when it does.
Fig. 1
Fig. 4
NOTE: The exhaust hose can be compressed or extended
moderately, but it is desirable to keep the length to a
minimum. Also make sure that the hose does not
have any sharp bends.
connected to the portable air conditioner.
Fig. 2
Fig. 5
Fig. 3
Hook
Page 11