Using The Timer As A Minute Minder; Setting The Timer To Turn One Or More Cooking Zones Off - ROSIERES RMT64MC Manuel D'utilisation

Table de cuisson à induction
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

a) Using the Timer as a Minute Minder
Make sure the cooktop is turned on.
Touch "+" the controls of the timer. The minder
indicator will start flashing and "00" will show
in the timer display.
Set the time by touching the "-" or "+" control
of the timer
Hint: Touch the "-" or "+" control of the timer
once to decrease or increase by 1 minute.
Touch and hold the "-" or "+" control of the timer to
decrease or increase by 10 minutes.
When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator will flash for 5 seconds.
Buzzer will beep for 30 seconds and the timer
indicator shows "- - " when the setting time finished.
b) Setting the timer to turn one or more cooking zones off
Touching the heating zone slider control
Set the time by touching the or control of the timer
Hint: Touch the "-" or "+" control of the timer
once will decrease or increase by 1 minute.
Touch and hold the "-" or "+"control of the timer
will decrease or increase by 10 minutes.
When the time is set, it will begin to count down immediately.
The display will show the remaining time and the timer
indicator flash for 5 seconds.
NOTE: The red dot next to power level indicator will
illuminate indicating that zone is selected.
Set one zone
16

Publicité

Chapitres

Table des Matières
loading

Table des Matières