Unpacking And Checking The Device; Overview Of Components And Control Elements; Quick Reference Guide; Preparing The Devices For Use - walser Walimex Pro Excellence Mode D'emploi

3. Unpacking and checking the device

1. Carefully unpack the scope of delivery.
2. Check whether the scope of delivery is complete:
• Remote control „Excellence"
3. Check whether the scope of delivery is free of damage.
NOTE
If the scope of delivery is incomplete or damaged, please contact
info@walser.de.
Within the scope of product improvements we reserve the right for
technical and optical changes.

4. Overview of components and control elements

1 Transmitter
2 Power setting
3 Sync socket
4 Test button
5 Group setting button
22
1
5
3
2
4

5. Quick reference guide

NOTE
Detailed instructions for the following activities can be found in
the relevant sections of these instructions for use. Strictly follow
the sequence of the following activities during first time use, to
prevent damage to the device.
• Set channel.
• Mount transmitter on camera.
• Press test button.

6. Preparing the devices for use

6.1 Setting the channel

You can choose from 16 different channels
1. Adjust the channel on the back of the transmitter.
(on certain models in the battery compartment)
Make the corresponding adjustment between studio flash and
transmitter by displacing the pin.
2. Adjust the channel on the studio flash. See operating instructions
for the studio flash.
The following table shows how to correctly adjust the code between
transmitter and receiver in the studio flash.
23