Maintenance/Repair - i.safe MOBILE IS-TH1 .2 Serie Guide De Démarrage Rapide

FURTHER SAFETY ADVISES
CAUTION
Laser Light. Do not stare into beam class 2 laser product 630 - 680 nm, 1 mW.
Do not put the device in environments with excessive temperatures.
Do not use the device in areas where regulations or legislatives prohibit the use.
Do not expose the device to strong magnetic fields, such as are emitted from induction ovens
or microwaves.
Do not attempt to open or repair the device. Improper repair or opening can lead to the
destruction of the device, fire or explosion. Only authorized personnel are allowed to repair
the device.
Observe all corresponding laws that are in force in the respective countries regarding the use
of devices while operating a vehicle.
Please power off the device before cleaning the device.
Do not use any chemical cleaning agents to clean the device. Use a damp and anti-static soft
cloth for cleaning.
The user alone is responsible for any and all damages and liabilities caused by malware
downloaded when using the network or other data-exchange functions of the device. i.safe
MOBILE GmbH cannot be held responsible for any of those claims.
WARNING
i.safe MOBILE GmbH will not assume any liability for damages caused by disregarding any of
these advices or by any inappropriate use of the device.

MAINTENANCE/REPAIR

Please note any legal requirements for periodic inspection.
The device itself has no user-serviceable parts. It is recommended to perform inspections
according to the safety regulations and advises. If there is a problem with the device, please
contact your vendor or consult the service center. If your device is in need of repair, you can
either contact the service center or your vendor.
PRODUCT DESCRIPTION
1
HOLDER: Holder for IS530.2
2
PLUG: Connecting IS530.2
3
SCAN BUTTON: Scanning barcodes.
4
EYELET: Eyelet for hand strap.
INSTALLATION
WARNING
The device may be connected only outside ex-hazardous areas to the IS530.2 via the ISM
interface!
6
(see illustration on page 2)