Connecting The External Fm Antenna - Verilux Rise & Shine VA05F Mode D'emploi

Operating Instructions — continued
To improve FM reception, you may wish to use the included external FM antenna.

Connecting the External FM Antenna:

1. Plug the 3.5 mm (1/8") plug of the FM antenna into the EXTERNAL ANTENNA
jack on the rear panel.
2. Straighten the antenna and position to establish optimum reception.
Setting the Alarm
Note: It is helpful to read through the entire section on
setting the alarm before you begin.
1. Press and hold the
the clock setting mode. Press
alarm setting mode.
• The alarm icons and sleep icon will flash on the left of the display. They
are, from top down: AL1 (Alarm 1), AL2 (Alarm 2) and Sleep
set two alarms, each with a specific alarm time. You may also choose a
brightness level for the start of the sleep cycle.
2. Select AL1 or AL2 or
button repeatedly. Press the
chosen icon will flash.
3. If AL1 or AL2 is chosen, press the Back
button repeatedly to adjust the alarm's time. Press
4. Press the Back
radio mode or natural soundcape mode and press the
• When the FM radio mode is selected, press the Back
Forward
Then press "set" to the selected radio station.
• When the natural soundcape mode is selected, press the Back
button or the Forward
wave. Then press
5. The Audio icon will flash and the FM Radio or selected natural soundcape
will play. Press the Back
adjust the alarm volume from 0 to 20. Press
6. The light brightness icon will flash and the light will turn on. Press the Back
button or the Forward
the light brightness and press
Setting Sleep Cycle Brightness
1. Press and hold the
Press again to enter the alarm setting mode.
Set
button for 3 seconds to enter
Set
Set
by pressing the Back
button to confirm the desired selection. The
Set
button or the Forward
button repeatedly to search for the desired radio station.
button repeatedly to select bird, frog, river or
to confirm the desired soundcape.
Set
button or the Forward
button on the right side repeatedly to adjust
Set
button for 3 seconds to enter the clock setting mode.
Set
again to enter the
button or the Forward
button or the Forward
button to select between FM
to confirm.
Set
to confirm and exit.
12
. You may
to confirm.
Set
button to confirm.
Set
button or the
button repeatedly to