Important Safety Instructions - Honeywell HT-70 Serie Manuel De L'utilisateur

IMPORTANT SAFETY
INSTRUCTIONS
READ AND SAVE THESE SAFETY INSTRUCTIONS
BEFORE USING THIS FAN
When using electrical
appliances, basic precautions
should always be followed to
reduce the risk of fire, electric
shock, and injury to persons,
including the following:
1. Use this fan only as described in this
manual. Other use not recommended
may cause fire, electric shock or injury
to persons.
2. This product is intended for household
use ONLY and not for commercial,
industrial or outdoor use.
3. To protect against electric shock, do
not place fan in window, immerse unit,
plug or cord in water or spray with
liquids.
4. This appliance has a polarized plug
(one blade is wider than the other). To
reduce the risk of shock, this plug is
intended to fit only one way in a
polarized outlet. If the plug does not fit
fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified
electrician. DO NOT attempt to defeat
this safety feature.
5. Close supervision is necessary when
any appliance is used by or near
children.
6. Turn the fan to the OFF position and
unplug the fan from the outlet when not
in use, when moving the fan from one
location to another and before
cleaning.
All manuals and user guides at all-guides.com
7. To disconnect the fan, grip the plug
8. Do not operate the fan in the presence
9. Do not place the fan or any parts near
10. Do not operate the fan with a
11. Avoid contact with moving fan parts.
12. The use of attachments not
13. Place the fan on a dry level surface.
14. Do not hang or mount fan on a wall or
15. Do not operate if the fan housing is
16. A loose fit between the AC outlet
WARNING: To Reduce The Risk of
Fire or Electric Shock, Do Not Use
This Fan With Any Solid-State Speed
Control Device.
and pull it from the wall outlet. Never
pull by the cord.
of explosive and/or flammable fumes.
an open flame, cooking or other
heating appliance
damaged cord or plug, if the product
malfunctions or is dropped or
damaged in any manner. (see
warranty)
recommended by the manufacturer
may be hazardous.
ceiling.
removed or damaged.
(receptacle) and plug may cause
overheating and a distortion of the
plug. Contact a qualified electrician to
replace loose or worn outlet.