Specification; I - Clean And Sterilize Your Pump - weewell WPB 820 Mode D'emploi

All manuals and user guides at all-guides.com

Specification

I - Clean and Sterilize your pump

Please clean and sterilize your pump before first usage.
1.
Pull the Intelligent Pump (C) and put it away from water on a dry place. Do
not wash this part or immerse in the water. Use only a soft moist cloth to clean
this part. Separate all parts, a.b.d.e.f.h.i.j., then wash in warm, soapy water,
then rinse them. Do not use antibacterial or abrasive cleaners/detergents.
2. Sterilize all parts in steam sterilizer, or by boiling for 10 minutes. If a steam
sterilizer is used, the pump will remain sterile in the sterilizer for minimum 4
hours, provided the lid is not removed.
Important: NEVER WASH OR STERILIZE the ıntellıgent Pump (C). You can wipe it
using a soft cloth.
Suggestion
1.
We recommend to use steam sterilizer. Firstly, boiling can damage the product
parts. Secondly, this unscientific method cannot achive sterilizing all surface
of the parts (Parts float on the surface of the boiling water during the process,
so boiling water cannot reach all surface to sterilize).
2. We do not suggest to sterilize after every usage. Excessive disinfection and
cleaning could easily lead to reduce the life of the breast pump. Clean the
breast pomp after every usage but only sterilize it once in a day (Recommend
to sterilize it at night).
(Important! If the breast pump will not be used for a long time, clean all parts and dry
before store it.
WPB 820 USER MANUAL
I
7