Changing The Side On Which The Door Opens - ETNA KCV178NRVS Mode D'emploi

INSTALLATION AND CONNECTION

Changing the side on which the door opens

Tools
Switch off the appliance and disconnect it from the mains.
1. Remove all door compartments and close the door.
2. Remove the cover plates, the screws and the upper hinge.
3. Carefully lift the top door from the middle hinge and place it on a padded surface to prevent
scratching.
4. Unscrew parts 'S1' and 'S2' and attach 'S2' and 'S3' (included) to the other side with the
screws.
Part S3
EN 15