Troubleshooting - Duratech PL-REM Manuel

Troubleshooting

PROBLEM
The controller doesn't react
to transmitter commands
The pool lights don't work
10
SOLUTION
• Check the battery of the hand-
held transmitter
• The transmitter is not paired-
correctly with the controller.
Repeat the pairing process
• Reduce the distance between
handheld transmitter and PL-
REM and/or remove obstacles
• Check if all connections are
made according to the electri-
cal scheme on page 5 or 6.
• Check if the "Color&Light" out-
put terminals of the controller
switch on and of when pushing
the on/off button on the trans-
mitter.