Innotek UltraSmart IUT-300E Mode D'emploi page 3

IUT-300E Manual 1/19/05
INNOTEK
Quick Start Guide
Step 1
Power Up
Remote: Insert 12v alkaline battery in the handheld remote. Replace the access
panel.
Collar: Charge the collar on the power outlet-mounted charging station. The light
on the collar will glow red while charging, and green when fully charged.
Step 2
Turning the collar ON and OFF
a. Press the
b. Hold the collar one inch from the remote, taking care not to touch the
c. Press the
d. To turn collar OFF, hold collar and remote one inch apart and press the
NOTE: To use two collars, repeat the procedure with the second collar.
This ON/OFF command only works when remote and collar are in close proximity; it will not work at a
distance. Never turn the unit ON/OFF while your dog is wearing the collar.
7:15 PM Page 4
® UltraSmart ™
C
button (for collar) on the remote once or
D
twice until appears in the display.
metal contacts that touch your dog's skin.
t
button. The collar will emit a
start-up tone, and the light will glow solid green.
down tone, and the light will glow solid red, then go out.
Micro Remote Trainer, 275m
2
IUT-300E
t
button. The collar will emit a shut-