Electrical Connection; Chimney Assembly - ROBLIN Astra Manuel D'instructions

• Push fit the air outlet fitting 15 onto the air outlet
of the hood body.
• The air outlet directional grills must be fitted after
the lower outlet duct has been installed
• Ensure that the activated charcoal filters have
been inserted.
• Connect the hood to the mains through a two-pole switch having a contact gap of at least 3 mm.
Upper chimney section
• Slightly widen the two sides of the upper
chimney and hook them behind the brackets
7.2.1, making sure that they are properly housed.
• Secure the sides to the brackets using the 4
screws 12e supplied.
Lower chimney section
• Insert the lower chimney fixing bush 17 in the top
of the hood body and rotate it 90° clockwise as far
as it will go.
• Slightly widen the two sides of the chimney and
hook them between the upper chimney section
and the wall, making sure that they are properly
housed.
• Secure the sides of the bottom section to the
bushes provided using the 2 screws 12e supplied.
• When installing the recirculation version, fit the
directional grills 8a – 8b in their housings so that
the directional symbols are at the top and towards
the front of the hood. Ensure that they are inserted
correctly in the outlet connection piece 15
GB
All manuals and user guides at all-guides.com
RECIRCULATION VERSION AIR OUTLET

ELECTRICAL CONNECTION

Chimney assembly

2.1
2
2.2
8b
1
15
7.2.1
12e
8a
12e
17
18