10. Passer les micro-modules à travers le
boîtier et pré-fixer (encliqueter) le capot
amovible sur le fond du boîtier.
11. Fixer le capot amovible sur le boîtier à
l'aide des 6 vis fournies, en commençant
par les 2 vis centrales.
Vis centrales à serrer en
premier.
ABS1431/E
Fig. Piquage droit
Straight midspan
10. Route the micromodules through the closure
and pre install (by clipping) the removable
cover at the rear of the closure.
11. Fasten the removable cover onto the closure
using the 6 screws provided , starting with
the two central screws.
Central screws to be tightened
first.
BLACkBOx G.652
18/37