Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
speciFicatiOns
Electrical Requirements
Motor Speed
Chuck Size
Chuck Type
unpacKing
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
instructiOns FOr
putting intO use
read the entire iMpOrtant
saFety inFOrMatiOn section
at the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
FrOM acciDental
OperatiOn:
turn the power switch of the
tool to its "OFF" position and
unplug the tool from its
electrical outlet before
assembling or making any
adjustments to the tool.
note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
SKU 97907
120 V~ / 60 Hz / 9.3A
n
0-2800/min
0
1/2 Inch
Keyless
90SM
E194601
tO prevent
seriOus injury
For technical questions, please call 1-800-444-3353.
assembly
1.
To install the Auxiliary Handle (3),
turn the Handle counterclockwise
to loosen its Collar. Slide the Collar
over the nose of the Gear Housing
(15). Position the Handle as desired,
tighten by turning the Handle clock-
wise.
Functions
1.
This impact drill can be used for drill-
ing, screw driving and impact drilling
operations.
2.
This tool has variable speed, and can
operate in forward or reverse. The
Trigger can be locked in the ON posi-
tion for extended operation.
Operating instructiOns
read the entire iMpOrtant
saFety inFOrMatiOn section
at the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
tool set up
FrOM acciDental
OperatiOn:
turn the power switch of the
tool to its "OFF" position and
unplug the tool from its
electrical outlet before
performing any inspection,
maintenance, or cleaning
procedures.
1.
To insert a drill bit, hold the rear ring
of the Chuck (2) with one hand while
tO prevent
seriOus injury
Page 9
Publicité
Table des Matières
