YABER Y30 Mode D'emploi page 11

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
Open the 4 buttons on the back of the projector and use the M4 * 10mm
screws to hang the projector on the stand.
Starting the projector
Turn on the projector by connecting the supplied power cord to the outlet,
and then pressing the main power switch. The projector will go into standby
mode and the power indicator will light red.
Only after pressing the "POWER" button on the projector or remote control
will the power indicator turn green and the projector will become ready to
use.
select the signal source:
press the "S" button on the remote control or the projector and choose
between: "AV", "PC-RGB", "HDMI 1", "HDMI 2", "USB".
1. Adjust the image size to get the best image size by moving the projector
back and forth, then use the focus ring to get the best focus.
Select the language menu
Language menu you have to select it when you turn on the projector for the
first time, you will see the interface in English. You can select one of the
menu languages: German, French, Italian, Spanish, Japanese and so on.
Please follow these steps:
1. Press the "M" button and find the "OPTION" interface, then find the
"OSD Language English".
2. Press the ENTER button to execute the selection.
08

Publicité

Table des Matières
loading

Produits Connexes pour YABER Y30

Table des Matières