User Servicing Instructions - Westinghouse WSFCD3BK Manuel D'instructions

SAFETY INFORMATION

USER SERVICING INSTRUCTIONS

Grasp plug and remove from the receptacle or other outlet device.
Do not unplug by pulling on cord.
A. Open fuse cover by sliding access cover
on top of attachment plug towards plug
blades.
B. Remove fuse carefully by gently pulling
out the ends of the fuse from the
receptacle. Risk of fire. Replace fuse only
with 2.5 or 5 amp, 125 Volt fuse.
C. Install replacement fuse by first placing
the end of the fuse into the fuse
receptacle which is opposite of the blades
of the plug, then carefully push in the
other end. Only push against the metal
end of the fuse, the glass center portion.
D. Close fuse cover by sliding the cover back
into the plug until it is completely closed
and latches.
RISK OF FIRE. Do not replace attachment plug. It contains a
safety device (fuse) that should not be removed. Discard product if
the attachment plug is damaged.
NOTE: Neither Westinghouse nor the dealer can accept any liability for
damage to the product or personal injury resulting from failure to observe
the electrical connection procedures.
WSFCD3BK_Multi Directional Stand Fan_EnFr_IB.indd 9
EN
9
9/12/2019 12:01:02