Before The First Use; Operation Instructions - Westinghouse WSFCD3BK Manuel D'instructions

BEFORE THE FIRST USE

1. Carefully take the device and its accessories out of the
packaging. Retain the packaging in case you would like to store
the device away or transport it at a later date. If you choose to
dispose of the packaging, then please do so according to the
applicable legal regulations.
2. Check the packaging contents for completeness and damages.
Should the contents in the packaging not be complete or be
damaged, do not use the device. Return it to your retail outlet
immediately.

OPERATION INSTRUCTIONS

1. Check the household voltage to ensure it matches the
appliance's rated specification. Be sure to plug into AC 120V~,
50-60Hz outlet.
2. Plug in, you can hear "Bi, Bi" then press [
starts at low-speed.
3. SPEED: Product has 3 speeds: Low - Mid - High. Select desired
speed by pressing the speed control for [
the indicator will light up to indicate the selected speed.
4. WIND MODE: Product has 3 wind modes: Natural - Normal
- Sleeping. Press [
corresponding indicator light will turn on to indicate the
selected mode.
5. TIMER: Press [
hours): 1H-2H-3H.........7H-0H-1H. At the same time, the indicator
light will on to indicate the selected time.
6. OSC: Press the [
and right, and press [
Meanwhile, you can adjust the up and down degree manually.
7. Press [
long time, unplug the fan from the mains outlet.
Replace the remote control battery
When the remote control buttons do not respond properly, the
EN
battery may have run out. Replace with a new 3V Lithium battery
(Model: CR2032).
12
WSFCD3BK_Multi Directional Stand Fan_EnFr_IB.indd 12
HOW TO USE
] to select the desired mode. The
] once to add one hour (Min 1 hour, max 7
] one time, the product will oscillate left
] again, the fan will stop oscillation.
] button to switch off the fan. If you don't use it for a
] button, product
], [ ], [ ],
9/12/2019 12:01:02