Using The Search & Skip Functions; Using The Display Function; Using The Disc And Title Menu - Samsung DVD-HD841 Mode D'emploi

Using the Search & Skip Functions
During play, you can search quickly through a
chapter or track or use the skip function to
jump to the next selection.
Searching through a Chapter or Track
During play, press the SERACH ( or )
button and press again to search at a faster speed.
• You can also use the Shuttle dial on the remote by
turning. (2X, 4X, 8X, 16X, 32X, 128X)
• In case of Super Audio CD, when the clips menu is off,
you can use this function. (See page 25)
DVD 2X, 8X, 32X, 128X
VCD 4X, 8X
CD/SACD/DVD-AUDIO 2X, 4X, 8X
Skipping Tracks
During play, press the or button.
• When playing a DVD, if you press the button, it
moves to the next chapter. If you press the button, it
moves to the beginning of the chapter. One more press
makes it move to the beginning of the previous chapter.
• When playing a VCD 2.0 in Menu Off mode, a VCD 1.1,
SACD, DVD-AUDIO or a CD, if you press the button,
it moves to the next track. If you press the button, it
moves to the beginning of the track. One more press
makes it move to the beginning of the previous track.
• If a track exceeds 15 minutes when playing a VCD and
you press the button, it moves forward 5 minutes, in
menu off mode. If you press the button, it moves
backward 5 minutes.
Note
• When playing a VCD 2.0, you can choose Menu
On or Menu Off by using the DISC MENU
button.

Using the Display Function

When Playing a DVD/VCD/CD
1. During play, press the INFO button on the remote.
2. Use the UP/DOWN buttons to select the desired
item.
3. Use the LEFT/RIGHT buttons to make the
desired setup and then press ENTER.
• You may use the number buttons of the remote
control to directly access a title, chapter or to
start the playback from the desired time.
4. To make the screen disappear, press the INFO
button again.
DVD
VCD
CD
ENG-16
Using the Display Function
To access the desired title when there is
more than one in the disc.
Title
For example, if there is more than one
movie on a DVD, each movie will be
identified.
Most DVD discs are recorded in
chapters so that you can quickly find a
Chapter
specific passage (similar to tracks on an
audio CD).
Allows playback of the film from a
desired time. You must enter the starting
Time
time as a reference.
Refers to the language of the film
soundtrack. In the example, the
Audio
soundtrack is played in English 5.1CH.
A DVD disc can have up to eight
different soundtracks.
Refers to the subtitle languages
available in the disc.
Subtitle
You will be able to choose the subtitle
languages or, if you prefer, turn them off
from the screen.
A DVD disc can have up to 32 different
subtitles.
Note
• When VCD 2.0 is in Menu Off mode only, this
function works. (See page 16)

Using the Disc and Title Menu

Using the Disc Menu
1. During the playback of a DVD disc, press the
MENU button on the remote.
2. Select Disc Menu using the UP/DOWN buttons,
then press the RIGHT or ENTER button.
Using the Title Menu
1. During the playback of a DVD disc, press the
MENU button on the remote.
2. Select Title Menu using the UP/DOWN buttons,
then press the RIGHT or ENTER button.
Note
• Depending on a disc, the Title and Disc Menus
may not work.
• Title Menu will only be displayed if there are at
least two titles in the disc.
• You can also use the Disc Menu, using the DISC
MENU button on the remote.
• In VCD 2.0, the DISC MENU button is used to
select Menu On or Menu Off mode.
ENG-17