Foppapedretti Playgio Instructions De Montage page 16

11
A
（1）
OPENING
Lift the TOP upper part until all three frame support brackets are correctly locked, as shown in fig. (3). A click will
B
indicate that it is assembled correctly.
Make sure that all 3 brackets are in the vertical position and locked correctly, before using the walker.
12
（1）
CLOSING
Move the anti-close safety lever (a) to the left of the frame support bracket fig. (2), while at the same time pressing
the close button (b) on the right of the bracket, and fold it inwards. Repeat this process on the remaining supports
to close the walker. Make sure that all three supports are folded up inside the product.
13
• ENGLISH •
All manuals and user guides at all-guides.com
A
(2)
B
a
b
(2)
"click"
2
1
A
B
"click"
TO USE
A
"click"
B
(3)
LOCKING THE SWIVEL SEAT
Lock the seat when the product is being used as a
walker:
1- Rotate the seat so that it is facing the front part of
the walker.
2- Press button "A" on the rotation locking device,
located under the top, and push the locking lever "B"
inwards.
Make sure that the lever is locked properly in the
appropriate slot.
A click will indicate that it is attached correctly.
UNLOCKING THE SWIVEL SEAT
Unlock the seat when the product is being used as an
Activity Centre.
Press button "A" and pull the lever "B" outwards to
unlock the seat.
16
"click"
"click"
"click"
(3)
2x AA 1,5V