Troubleshooting - hestan KWD 30 Mode D'emploi

TROUBLESHOOTING

Repairs must only be performed by specialized and qualified personnel. Any repair work not
performed by professional personnel may cause damage to the appliance for which Hestan will
EN
not be liable.
The following problems can be checked by the consumer without the assistance of the Service
Department.
THE DRAWER IS NOT HOT ENOUGH
Make sure that:
• The appliance is turned on;
• The correct temperature has been set;
• The opening of the ventilation fan is not blocked by plates or other large obstructions;
• The drawers have had sufficient time to heat up.
THE DRAWER DOES NOT GET WARM
Is it turned on? Is it turned on to DEFROST by mistake?
Can you hear the fan running?
• If the fan is running then the heating system should be working, except in DEFROST mode.
If the fan does not run, open the drawer and see if the interior lights come on. If neither light
comes on, check that the unit is plugged in and the breaker hasn't tripped.
• If the light comes on but the fan doesn't run, call Hestan Customer Care.
14
©2018 Hestan Commercial Corporation